Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed color. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 5-35°C.

TIPS:

• Ensure the surface is clean, dry, and free of grease
• Wear protective gloves, protective clothing, eye/face protection
• Always paint in an open space in the open air
• The space should be as dust-free as possible
• Protect the surrounding area from overspray
• Test spray on a non-visible area
• Remove any existing varnish, waxes, oils, wood stains, dust, dirt, grease, uneven areas and sticky stuff before applying a wood varnish
• Choose a day when the weather isn’t too humid. Varnish will dry slower in humid or cold conditions
• Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
• Spray surface from a distance of 25-30cm
• Apply in several thin layers, spraying in sweeping motions
• Don't go over bits you have missed, but leave to dry and then re-varnish area. Don't go back over areas you have already done, as this can cause clouding
• Don't attempt to remove once applied
• After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)