BUMPER PAINT - 564 - Black Structure

BUMPER PAINT - 564 - Black Structure

Brand:CosmosLac
Product Code:BUMPER PAINT - 564 - Black Structure
Availability:Out Of Stock
  • AED 35.00

BUMPER PAINT

564 - BLACK STRUCTURE

DESCRIPTION

Special paint designed especially for car bumpers and similar hard plastic surfaces, it creates a texture surface. Strong adhesion to hard plastics, without any primer. Especially resistant to chipping, and weahter conditions. It offers an attractive satiny finish. 

FEATURES

  • Renews and protects weathered or discolored bumpers & mouldings
  • Creates a textured surface
  • OEM color match
  • No primer need
  • Do not crack and withstand stresses and damage from gravel
  • High weather resistance & color stability
  • Fast Dry. The drying time depends on surrounding temperature, air humidity and thickness of the applied coat
  • Long-lasting shine and colour
  • Scratch and shockproof
  • Easy to use
  • Excellent coverage
  • Excellent adhesion
  • 400 ml

APPLICATION

It can be used to repair and improve plastic bumpers while still maintaining the original structure suitable for decorative indoor uses. Gives synthetic surfaces a silky shine. Ideal for hard plastic surfaces, and for protecting the lower part of the car body from salt, bumps, and moisture.


INSTRUCTIONS FOR USE

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed color. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-32°C and humidity below 65% to ensure proper drying. Do not use on objects that may exceed 90°C surface temperature. Storage 10-30°C.

TIPS:

  • Ensure the surface is clean, dry, and free of grease
  • Wear protective gloves, protective clothing, eye/face protection
  • Always paint in an open space in the open air
  • The space should be as dust-free as possible
  • Protect the surrounding area from overspray
  • Test spray on a non-visible area
  • Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
  • Spray surface from a distance of 25cm
  • Apply in several thin layers, spraying in sweeping motions
  • After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)

CAP SYSTEM

  • FLAT JET WIDE CAP

    – Flat spray trajectory
    – Vertical or horizontal
    – Smooth & equal
    – Ideal for fill-ins
    – Calligraphic effects

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha