CUT & DRILL OIL - 746
-
contact us+971503005963
DESCRIPTION
Lubricant for metal drills, cutting knifes and metal tapping. Suitable for most metals, such as aluminum, brass, and stainless steel. Increases lifetime of metal drills and cutting knifes. Reduces wear and friction. Excellent Extreme Pressure and Anti Wear properties. Protects against oxidation and corrosion. Use on room temperature.
FEATURES
- High performance spray paste metalworking
- Cling directly to the metal or cutting tool when applied without fluid run off
- Increases lifetime of metal drills and cutting knives
- Reduces wear and friction
- Extreme Pressure and Anti Wear properties
- Protects against oxidation and corrosion
- Excellent adhesion
- Low odor
- 400ml
APPLICATION
Ideal for use when drilling, broaching, reaming, tapping and countersinking holes in a wide range of metals including mild, structural and stainless steels. Ideal for use in overhead or positional applications.
INSTRUCTIONS FOR USE
Shake can well. Before drilling, apply cutting oil lubricant directly to the drill bit and part being drilled. Repeat if necessary. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 5-35°C.
TIPS:
- Use on room temperature
- Extremely flammable aerosol
- Do not expose to heat, sparks or flames
- Do not spray on an open flame or other ignition source
- Store in a cool, dry area
- Use only in a well ventilated area
- No smoking
- Pressurized container: Do not pierce or burn, even after use
- Do not spray on an open flame or other ignition source
- Avoid breathing spray.
- Wear protective gloves/protective clothing/eye protection/face protection/hearing protection
- Do not expose to temperatures exceeding 50°C/122°F
- Apply in fine even coats. Optimum lubrication is achieved once the solvent has evaporated
- Shake can from time to time during use
- Protect the object and the surrounding area from spray mist
- KEEP AWAY FROM CHILDREN AND ANIMALS