Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed colour. After use, turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 05-35°C.

TIPS:

• Ensure the surface is clean and dry
• Wear protective gloves, protective clothing, eye/face protection
• Always paint in an open space in the open air
• Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
• Solid colours: spray surface from a distance of 5-12cm
• Pocket Clears, Frame Builder’s Smoothing Putty, Frame Builder’s Transparent Finish, Frame Builder’s Cold-Zinc, Frame Builder’s Metal Primer, Frame Builder’s Carbon Primer, Frame Builder’s Metal Plating: spray surface from a distance of 25-30cm
• Keirin Flake: spray surface from a distance of at least 25-30cm
• Frame Builder’s Top Wax: Spray onto a paper towel or soft lint-free cloth and apply gently
• When spraying, keep hand moving at all times. Allow to dry before adding 2nd coat (touch dry: 10 minutes, complete cure: 2 hours)
• At end, turn can upside down and spray for 2 seconds before storing
• Protect can from sunlight and temperatures exceeding 50°C/122°F
• Bike Frame Builders Transparent Finish - Matte/Gloss
• For a matte top-coat, finish with the Frame Builder's Transparent Finish - Matte
• For ongoing protection (whether the finish is matte, satin or gloss), regularly apply the Frame Builder's Top Wax
• Paint first vertically and then horizontally (this is one coat). Wait 10 minutes before painting the next coat