Frame Builders Transparent Finish Gloss

Frame Builders Transparent Finish Gloss

Product Code: Frame Builders Transparent Finish Gloss
  • AED 30.00




This acrylic Transparent Finish adds a gloss top-coat. A groundbreaking range of bicycle-specific technical sprays designed for both amateur and professional use. The Frame Builder's Transparent Finish is suitable for steel, aluminium and carbon parts. It is a transparent varnish that doesn’t drip, dribble or misbehave in any way. It’s revolutionary in its ease of application and quality of finish, making it perfect for customising, repairing and restoring. Customising your ride just got simple and affordable.


  • Product colour: clear gloss
  • Spray distance: 25-30cm
  • Ideal for steel, aluminium and carbon parts
  • Recommended minimum coat: one
  • One coat: matte / two or more coats: gloss
  • Drying time between coats: 2 hours / full cure: at least 24 hours
  • Requires no post-application heat treatment
  • Non-drip, non-dribble formula
  • Good adhesion
  • Permanent and resilient: UV-resistant and weather-resistant
  • Easily-achieved fading, stencilling and blending effects
  • 400 ml


Ideal for steel, aluminium and carbon bikes. Suitable for DIY or professional use on other surfaces: Wood, stone, concrete & marble.


Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed colour. After use, turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 05-35°C.


  • Ensure the surface is clean and dry
  • Wear protective gloves, protective clothing, eye/face protection
  • Always paint in an open space in the open air
  • Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
  • Solid colours: spray surface from a distance of 5-12cm
  • Pocket Clears, Frame Builder’s Smoothing Putty, Frame Builder’s Transparent Finish, Frame Builder’s Cold-Zinc, Frame Builder’s Metal Primer, Frame Builder’s Carbon Primer, Frame Builder’s Metal Plating: spray surface from a distance of 25-30cm
  • Keirin Flake: spray surface from a distance of 25-30cm
  • Frame Builder’s Top Wax: Spray onto a paper towel or soft lint-free cloth and apply gently
  • When spraying, keep hand moving at all times. Allow to dry before adding 2nd coat (touch dry: 10 minutes, complete cure: 2 hours)
  • At end, turn can upside down and spray for 2 seconds before storing
  • Protect can from sunlight and temperatures exceeding 50°C/122°F
  • Bike Frame Builders Transparent Finish - Matte/Gloss
  • For a matte top-coat, finish with the Frame Builder's Transparent Finish - Matte
  • For ongoing protection (whether the finish is matte, satin or gloss), regularly apply the Frame Builder's Top Wax
  • Paint first vertically and then horizontally (this is one coat). Wait 10 minutes before painting the next coat



    – Soft layers of colour
    – Clean coverage
    – Precision
    – No Drips

Write a review

Note: HTML is not translated!
    Bad           Good