ANTICHIP - 250 - White

ANTICHIP - 250 - White

Brand:CosmosLac
Product Code:ANTICHIP - 250 - White
Availability:12
  • AED 28.00

ANTICHIP

250 - WHITE

DESCRIPTION

Protective and soundproofing material based on synthetic resins and rubber elastics. Dries quickly and creates a textured surface. Ideal for protecting the lower part of the car body from salt, bumps, and moisture. Can be painted. Available in 3 colors.

FEATURES

  • Resistant to high temperatures
  • Strong insulation
  • Elastic textured finish
  • Fast over paintable
  • Excellent stone chip, weathering and corrosion resistant
  • High performance
  • Fast drying
  • Excellent sag resistance
  • Sound deadening
  • 400 ml

APPLICATION

It can be used for underbody, wheel arches, front/rear valences, body sills, new parts and repair panels.


INSTRUCTIONS FOR USE

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed color. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-32°C and humidity below 65% to ensure proper drying. Do not use on objects that may exceed 90°C surface temperature. Storage 10-30°C.

TIPS:

  • Ensure the surface is clean, dry, and free of grease
  • Wear protective gloves, protective clothing, eye/face protection
  • Always paint in an open space in the open air
  • The space should be as dust-free as possible
  • Protect the surrounding area from overspray
  • Test spray on a non-visible area
  • Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
  • Spray surface from a distance of 25cm
  • Apply in several thin layers, spraying in sweeping motions
  • After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)


INSTRUCTIONS FOR USE

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed color. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-32°C and humidity below 65% to ensure proper drying. Do not use on objects that may exceed 90°C surface temperature. Storage 10-30°C.

TIPS:

  • Ensure the surface is clean, dry, and free of grease
  • Wear protective gloves, protective clothing, eye/face protection
  • Always paint in an open space in the open air
  • The space should be as dust-free as possible
  • Protect the surrounding area from overspray
  • Test spray on a non-visible area
  • Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
  • Spray surface from a distance of 25cm
  • Apply in several thin layers, spraying in sweeping motions
  • After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)

CAP SYSTEM

  • STANDARD CAP

    – No Drips
    – High Coverage
    – Gradual Spraying
    – Thin & Regular

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha