BUMPER PAINT - 560 - White

BUMPER PAINT - 560 - White

Brand:CosmosLac
Product Code:BUMPER PAINT - 560 - White
Availability:12
  • AED 35.00

BUMPER PAINT

560 - WHITE

DESCRIPTION

Paint formulated for car bumpers and in general for any hard plastic surface. Protective and soundproofing material based on synthetic resins and rubber elastics. Dries quickly. Can be painted. It has excellent adhesion, and coverage maintaining the original structure of the bumper. It doesn't crack, withstand stresses and damages for gravel. Available in 4 colors.

FEATURES

  • Renews and protects weathered or discolored bumpers & mouldings
  • OEM color match
  • No primer need
  • Do not crack and withstand stresses and damage from gravel
  • High weather resistance & color stability
  • Fast Dry. The drying time depends on surrounding temperature, air humidity and thickness of the applied coat
  • Long-lasting shine and colour
  • Keeps the bumper’s original structure
  • Scratch and shockproof
  • Easy to use
  • Excellent coverage
  • Excellent adhesion
  • 400 ml

APPLICATION

It can be used to repair and improve plastic bumpers while still maintaining the original structure suitable for decorative indoor uses. Gives synthetic surfaces a silky shine. Ideal for hard plastic surfaces, and for protecting the lower part of the car body from salt, bumps, and moisture.


INSTRUCTIONS FOR USE

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed color. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-32°C and humidity below 65% to ensure proper drying. Do not use on objects that may exceed 90°C surface temperature. Storage 10-30°C.

TIPS:

  • Ensure the surface is clean, dry, and free of grease
  • Wear protective gloves, protective clothing, eye/face protection
  • Always paint in an open space in the open air
  • The space should be as dust-free as possible
  • Protect the surrounding area from overspray
  • Test spray on a non-visible area
  • Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
  • Spray surface from a distance of 25cm
  • Apply in several thin layers, spraying in sweeping motions
  • After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)

CAP SYSTEM

  • FLAT JET WIDE CAP

    – Flat spray trajectory
    – Vertical or horizontal
    – Smooth & equal
    – Ideal for fill-ins
    – Calligraphic effects

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha