BRAKE CALIPER & ENGINE PAINT - 702 - Yellow

BRAKE CALIPER & ENGINE PAINT - 702 - Yellow

Brand:CosmosLac
Product Code:BRAKE CALIPER & ENGINE PAINT - 702 - Yellow
Availability:12
  • AED 30.00

BRAKE CALIPER & ENGINE PAINT

702 - YELLOW

DESCRIPTION

Ideal for painting car brake calipers. Creates an amazing glossy finish and withstands high temperatures. It does not break, rust, or shrink even under the most difficult conditions. Available in 3 colors.

FEATURES

  • Spray Paint specifically designed for brake, drum, caliper and rotor custom detailing
  • Provides a superior glossy finish
  • Highest quality caliper paint
  • Superior heat and chemical resistance
  • Fast drying
  • Low odor
  • Flexible & non-cracking
  • Rust protection
  • Extremely easy to apply and recoat
  • Exceptional adhesion
  • High weather resistance and colour stability
  • Withstand dirt and other chemicals
  • 400ml

APPLICATION

Specifically designed for brakes, drums, calipers, and rotors.


INSTRUCTIONS FOR USE

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed color. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-32°C and humidity below 65% to ensure proper drying. Do not use on objects that may exceed 90°C surface temperature. Storage 10-30°C.

TIPS:

  • Ensure the surface is clean, dry, and free of grease
  • Wear protective gloves, protective clothing, eye/face protection
  • Always paint in an open space in the open air
  • The space should be as dust-free as possible
  • Protect the surrounding area from overspray
  • Test spray on a non-visible area
  • Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
  • Spray surface from a distance of 25cm
  • Apply in several thin layers, spraying in sweeping motions
  • After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)

CAP SYSTEM

  • STANDARD CAP

    – No Drips
    – High Coverage
    – Gradual Spraying
    – Thin & Regula

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha